During installation, try to line up the seams as best as possible at eye level and allow the tops and bottoms of wallcovering to shift if necessary.
Vinyl wallcovering can act as a vapor barrier and consequently should not be installed on walls that are susceptible to excessive condensation or moisture infiltration.
The wallcovering may be made permeable (minimum 8+ perms) by a micro-venting process.
Permeable wallcovering cannot compensate for water intrusion caused by poor building envelope design, faulty construction, building system failure or improper maintenance practices.
If transported during winter months the wallcovering must be allowed to warm to minimum of 70 degrees F.
Please bear in mind that the weight of this item is above average (approximately 2lbs/yd).
